Aegis® H55C2ZP

Aegis® H55C2ZP is a 2.7 RV, unfilled, medium viscosity, non-lubricated, polyamide 6/66 copolymer for molding or compounding. With a broad processing window and excellent melt fluidity for filling thin sections, it provides exceptional processability. Aegis® H55C2ZP resin combines strength, stiffness and toughness with chemical and abrasion resistance. For glass- or mineral-filled applications, Aegis® H55C2ZP resin also offers superior surface appearance and low warp.

Nylon Copolyamide Resin, Polyamide 6/66 (PA 6/66) Processing Methods: Extrusion coating, injection molding, extrusion, compoundinProperties and Features:  It exhibits good strength, stiffness and toughness along with excellent chemical and abrasion resistance. For glass- or mineral-filled applications, Aegis® H55C2ZP also offers excellent surface appearance and low warp.Download TDSMaterial handling: Maximum Water Content: 0.12%Aegis® H55C2ZP copolyamide resin is supplied in sealed containers and drying prior to processing is not required. However, high moisture is the primary cause of processing issues. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level. More information about safe handling procedures can be obtained by requesting the Safety Data Sheet on AdvanSix.com.Recommended Melt Temperature RangeMelt Temperature: Recommended range is 230-275°C (446-527°F)Typical Extrusion Temperature ProfileBarrel: 239-256°C (462-493°F)Adapter: 250-256°C (482-493°F)Die: 250-256°C (482-493°F)Process Melt Temperature: 250-260°C (482-500°F)Screw ParametersMetering Section: 40%Transition Section: 3 to 4 flightsFeed Section: Balance of screw lengthCompression Ratio: 3.5:1 to 4.0:1L/D Ratio: 24:1 AdvanSix AdvanSix Polymers and Resins,Thermoplastics,Polyamides Automotive and transportation,Industrial manufacturing,Printing and Packaging

  • Brand: : AdvanSix
  • Producer/Supplier : AdvanSix
  • Chemical Group/INCI : Nylon
  • Chemical Category : Polymers and Resins
  • Sub Category : Thermoplastics , Polyamides
  • Composition :

    Copolyamide Resin, Polyamide 6/66 (PA 6/66)
  • Industry/Applications

    : Automotive and transportation, Industrial manufacturing, Printing and Packaging

DOWNLOAD DOCUMENTS REQUEST SAMPLE

SIMILAR PRODUCT

Aegis® H120ZP

Aegis® H120ZP is a high viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. It conforms to FDA requirements of 21 CFR ..

.