Product Overview
Aegis® H100ZP is a medium viscosity, nylon 6, extrusion grade homopolymer for cast or blown film. It conforms to FDA requirements of 21 CFR 177.1500 as well as EU Directive 2011/10/EC. It possesses the combination of strength, toughness and thermoforming properties associated with nylon 6 as well as excellent heat, chemical and abrasion resistance. Processing Methods: Blown film extrusion, film extrusion, thermoforming, extrusion, pipe, profile and tubing extrusion
Product Identity
| Chemical name | Nylon |
|---|---|
| Chemical composition | Polyamide 6 (PA 6) |
Processing & Availability
- Additional product information
- Material Handling
- Additional product information
- Aegis® H100ZP is supplied in sealed containers and drying prior to processing is not required. However, high moisture is
- Additional product information
- the primary cause of processing problems. If drying becomes necessary, a dehumidifying or desiccant dryer operating at
- Additional product information
- 80°C (176°F) is recommended. Drying time is dependent on moisture level. Further information concerning safe handling
- Additional product information
- procedures can be obtained from the Safety Data Sheet. Alternatively, please contact your AdvanSix representative.
Technical Documents & Source References
No technical PDF is referenced in the source record for this product.