Product Overview
A moderate defoamer with less side effects. AFCONA-2763 prevents the formation of Defoamers Silicone defoamer with modification of fluorocarbon AFCONA - 2763 is recommended for brush and conventional spray application, very suitable also for systems ranging from low polar to high polar. It also gives reasonable good compatibility and clarity to the systems. 1) Epoxy, solvent based or solventless 2) polyurethane systems for wood, plastic, flooring and car refinish 3) airless spray coatings 4) stoving paints for general industrials 5) UV curing system especially for acrylate epoxy 6) High viscosity systems Addition and dosage 0.1 - 0.7% on total formulation. In general under normal conditions, the dosage is 0.2 – 0.5% based on total formulation Incorporation To prevent foaming AFCONA-2763 can be added prior to processing. If it is added to the finished product, care must be taken to ensure uniform distribution StorageAFCONA-2763 should be stored in a cool dry place. When kept in an original unopened container, it will keep up to 5 years from the date of manufacture. The expiry date is indicated on the container Afcona Additives Afcona Additives Additives and Modifiers,Anti foaming agent Paints coatings and inks
Product Identity
| Chemical name | Defoamers |
|---|---|
| Chemical composition | Silicone defoamer with modification of fluorocarbon |
Processing & Availability
- Additional product information
- AFCONA - 2763 is recommended for brush and conventional spray application, very suitable also for systems ranging from low polar to high polar. It also gives reasonable good compatibility and clarity to the systems.
- Additional product information
- 1) Epoxy, solvent based or solventless
- Additional product information
- 2) polyurethane systems for wood, plastic, flooring and car refinish
- Additional product information
- 3) airless spray coatings
- Additional product information
- 4) stoving paints for general industrials
- Additional product information
- 5) UV curing system especially for acrylate epoxy
- Additional product information
- 6) High viscosity systems
- Additional product information
- 0.1 - 0.7% on total formulation. In general under normal conditions, the dosage is 0.2 – 0.5% based on total formulation
- Additional product information
- To prevent foaming AFCONA-2763 can be added prior to processing. If it is added to the finished product, care must be taken to ensure uniform distribution
- Additional product information
- AFCONA-2763 should be stored in a cool dry place. When kept in an original unopened container, it will keep up to 5 years from the date of manufacture. The expiry date is indicated on the container
Technical Documents & Source References
No technical PDF is referenced in the source record for this product.