Product Overview
Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are
Typical Technical Properties
Product-specific technical values. Confirm current specifications with the supplier before commercial use.
| Property | Typical value | Condition | Test method / source |
|---|---|---|---|
| Propertya | Test Methodb | Typical Value, Unitsc | |
| Specific Gravity | D 792 | 1.205 | |
| Tensile Stress @ Yield | D 638 | 43.1 MPa (6300 psi) | |
| Tensile Stress @ Break | D 638 | 52.4 MPa (7600 psi) | |
| Elongation @ Break | D 638 | 55 % | |
| Flexural Modulus | D 790 | 1793 MPa (2.6 x 105 psi) | |
| Flexural Yield Strength | D 790 | 60 MPa (8700 psi) | |
| Rockwell Hardness, R Scale | D 785 | 98 | |
| @ 23°C (73°F) | D 256 | 152 J/m (2.8 ft·lbf/in.) | |
| @ -40°C (-40°F) | D 256 | 83 J/m (1.6 ft·lbf/in.) | |
| Refractive Index, nD | D 542 | 1.46-1.49 | |
| Light Transmissione | E 308 | >90 % | |
| Hazee | D 1003 | <8.5 % | |
| @ 23°C (73°F) | DSC | 1.26-1.67 kJ/kg·K (0.301-0.399 Btu/lb·°F) | |
| Thermal Conductivity | C 177 | 0.17-0.33 W/m·K (1.2-2.3 Btu·in./h·ft2·°F) | |
| Coefficient of Linear Thermal Expansion | D 696 | 11-17 x 10-5 /°C (mm/mm·°C) (6-9 x 10-5 /°F (in./in.·°F)) | |
| Mold Shrinkage | D 955 | 0.2-0.6 % | |
| Dielectric Strength | D 149 | 11.8-18.7 kV/mm (300-475 V/mil) | |
| 1 MHz | D 150 | 3.3-3.8 | |
| 1 MHz | D 150 | 0.01-0.15 | |
| Volume Resistivity | D 257 | 1013-1015 ohm·cm | |
| Water Absorption, 24 h immersion | D 570 | 1.7 % | |
| Soluble Matter Loss | D 570 | 0.1 % | |
| [72 hours @ 80°C (176°F)] | D 707 | 0.2 % | |
| @ 0.455 MPa (66 psi) | D 648 | 95 °C (203 °F) | |
| @ 1.82 MPa (264 psi) | D 648 | 85 °C (185 °F) | |
| Vicat Softening Temperatured | D 1525 | 118 °C (244 °F) |
Product Identity
| Chemical name | Cellulose polymer |
|---|
Applications
Application areas documented for this product grade.
Consumer electronics
Graphic arts
Industrial
Other-LCD displays
Pens/stationary
Point-of-purchase
Protective & performance film
Sporting equipment
Processing & Availability
- Additional product information
- General
- Additional product information
- Plasticizer | | 4 %
- Additional product information
- Mechanical Properties
- Additional product information
- Izod Impact Strength, Notched
- Additional product information
- Miscellaneous Butyrate Properties
- Additional product information
- Specific Heat
- Additional product information
- Dielectric Constant
- Additional product information
- Dissipation Factor
- Additional product information
- Permanence Properties
- Additional product information
- Weight Loss on Heating
- Additional product information
- Thermal Properties
- Additional product information
- Deflection Temperatured
Technical Documents & Source References
No technical PDF is referenced in the source record for this product.