FindYourChemical 2.0 · Chemical product discovery & sourcing
FindYourChemical — Chemicals for Any Formulation OnlyTRAININGS
Industrial Chemical Product
Chemical catalog / Product #638

Eastoflex P1023 Amorphous Polyolefin

Propylene-based amorphous polyolefin homopolymer

Manufacturer · Eastman Chemical Company Chemical name · Amorphous Polyolefins
2,300 cP Melt viscosity (Brookfield) 190°C
155°C Ring-and-ball softening point
−10°C Glass transition temperature (Tg)

Product Overview

Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ P1023 is a propylene homopolymer having a melt viscosity of 2,300 mPa·s at 190°C.

Key Attributes

Broad compatibility with numerous elastomers, polymers and tackifying resins
Thermal and ultraviolet stability
Resistance to water and moisture
Low color and low odor
Softness, tackiness and flexibility

Typical Technical Properties

Product-specific technical values. Confirm current specifications with the supplier before commercial use.

Property Typical value Condition Test method
Melt viscosity (Brookfield) 2,300 cP 190°C ASTM D 3236
Ring-and-ball softening point 155°C — ASTM E 28
Glass transition temperature (Tg) −10°C — ASTM D 3418
Penetration hardness 18 dmm — ASTM D 5
Gardner color 1.0 Molten Not specified
Physical form Molten / solid Consult grade packaging guidance Not applicable

Product Identity

Chemical name Amorphous Polyolefins

Applications

Application areas documented for this product grade.

Adhesives and sealants
Automotive protective coatings
Carpet construction
Case and carton sealing
Film and polymer modification
Packaging tapes and labels
Paints and coatings
Road markings and roofing products
Wire and cable applications

Compatibility & Formulation Considerations

Published technical data describes compatibility with tackifying resins, elastomers and selected polyolefins. Examples listed include aliphatic and hydrogenated tackifiers, butyl rubber, low-density polyethylene, polypropylene, mineral oil and SEBS block copolymers. Formulation-specific compatibility must still be tested.

Technical Documents & Source References

Manufacturer & ingredient documentation

Eastoflex P1023 Technical Data Sheet — Eastman (2019 edition)

View technical source

Historical, independently hosted copy of a published grade-specific technical data sheet. Values are typical, not guaranteed specifications. Verify the current grade datasheet and supplier before commercial publication.