Product Overview
Plasthall® PR- LCOA is a low molecular weight, long chain oligomer designed to provide excellent extraction resistance to many fluids. Plasthall PR-LCOA is highly recommended as a phthalate alternative for PVC and nitrile rubber. LCOA is equivalent to DOP in lowering hardness in PVC and nearly equal to other phthalate esters. Plasthall PR-LCOA has low migration and is non-toxic which makes it well suited for use in children’s toys, food contact and medical applications. This product is acceptable for use under the following sections of the FDA 21 CFR 175.105, 175.300, 175.320, 176.170, 177.1210 and 177.2600.
Product Identity
| Chemical name | Plasticizers |
|---|
Applications
Application areas documented for this product grade.
Adhesive and sealant
Automotive molded parts
Automotive sealant
Automotive shoes & boots
Coated fabrics
Commercial graphic film
Conveyor belts
Decals
Electrical tape
Food hoses
Fuel hose
Gaskets
General-purpose film
Hose and tubing
Industrial hose & tubing
Phthalate alternative
Plastisol coatings
PVC Film
PVC Gasketing
Wall covering
Wire & cable
Processing & Availability
- Additional product information
- Moisture, % | 0.05
- Additional product information
- Specific Gravity, 25°C | 1.06
- Additional product information
- Viscosity at 25°C, cSt | 950
- Additional product information
- Packaging | • 55 gallon drum - 450lbs
- Additional product information
- Tote - 2250lbs
- Additional product information
- Bulk - --lbs
- Additional product information
- Nitrile
- Additional product information
- Plasticizer, pphr | 20.0
- Additional product information
- Tensile Strength Ultimate, psi | 2145
- Additional product information
- Ultimate Elong., % | 595
- Additional product information
- Shore A Hardness | 60
- Additional product information
- Low Temperature Brittle Point, °C | -33
- Additional product information
- Low Temperature Gehman T10, °C, °C | -32
- Additional product information
- Air Oven Aging | -1.0
- Additional product information
- ASTM #1 Oil | -3.1
- Additional product information
- IRM 903 | 6.7
- Additional product information
- Distilled water extraction | 5.3
- Additional product information
- PVC
- Additional product information
- Plasticizer, pphr | 67.0
- Additional product information
- Tensile Strength Ultimate, psi | 2295
- Additional product information
- Ultimate Elong., % | 415
- Additional product information
- Shore A Hardness | 65
- Additional product information
- Low Temperature Brittle Point, °C | -24
- Additional product information
- Volatilization | -2.6
- Additional product information
- High humidity | -0.3
- Additional product information
- Percent Change by:
- Additional product information
- Hexane | -6.6
- Additional product information
- Cottonseed Oil | -7.8
- Additional product information
- Distilled water | -0.8
- Additional product information
- Soapy Water | -3.3
- Additional product information
- Global Compliance:
- Additional product information
- EU
- Additional product information
- USA
- Additional product information
- Polymers:
- Additional product information
- Acrylic rubber
- Additional product information
- Chlorinated rubber
- Additional product information
- Epichlorohydrin
- Additional product information
- Hydrogenated nitrile
- Additional product information
- Polyacrylate
- Additional product information
- Polyvinyl chloride
Technical Documents & Source References
No technical PDF is referenced in the source record for this product.