Product Overview
CYCOLAC™ Resin X11 is automotive: high heat resistance, excellent flow/impact balance and high gloss ABS, It provides excellent aesthetics, flow, strength and dimensional stability and exhibits high temperature, fatigue and chemical resistance.
Key Attributes
Excellent colorability
Good low temperature ductility
High dimensional stability
Good electrical propositions
Good paintability
Application areas: Air Cabin Interiors, Applique, Auto Aftermarket, Cladding, Cluster, Console, Cowl Vent Grille, Doors Hardware/Trim, Electronic Components, Enclosures, Exterior Mirror, Exterior Trim, Food Processor, Front Grille, Glove Box, Infotainment/Telematic, Interior, Overhead, Rear/Signal Lighting, Recreational Vehicle, Seat,Spoiler, Surgical Devices
Processing methods:
Drying Temperature: 90-95°C, Drying Time: 2-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.1%, Melt Temperature: 230-275°C, Nozzle Temperature: 230-275°C, Front - Zone 3 Temperature: 230-255°C, Middle - Zone 2 Temperature: 210-225°C, Rear - Zone 1 Temperature: 195-210°C, Mold Temperature: 50-80°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 30-60rpm, Shot to Cylinder Size: 50-70%, Vent Depth: 0.038-0.051mm
For full technical details download the related 1. document, 2. document
Product Identity
| Chemical name | Acrylonitrile Butadiene Styrene (ABS) |
|---|---|
| Chemical composition | Styrene>> Acrylonitrile Butadiene Styrene (ABS) |
Technical Documents & Source References
No technical PDF is referenced in the source record for this product.